About the Project
21 Multidimensional Theta FunctionsApplications

§21.7 Riemann Surfaces

Contents
  1. §21.7(i) Connection of Riemann Theta Functions to Riemann Surfaces
  2. §21.7(ii) Fay’s Trisecant Identity
  3. §21.7(iii) Frobenius’ Identity

§21.7(i) Connection of Riemann Theta Functions to Riemann Surfaces

In almost all applications, a Riemann theta function is associated with a compact Riemann surface. Although there are other ways to represent Riemann surfaces (see e.g. Belokolos et al. (1994, §2.1)), they are obtainable from plane algebraic curves (Springer (1957), or Riemann (1851)). Consider the set of points in 2 that satisfy the equation

21.7.1 P(λ,μ)=0,

where P(λ,μ) is a polynomial in λ and μ that does not factor over 2. Equation (21.7.1) determines a plane algebraic curve in 2, which is made compact by adding its points at infinity. To accomplish this we write (21.7.1) in terms of homogeneous coordinates:

21.7.2 P~(λ~,μ~,η~)=0,

by setting λ=λ~/η~, μ=μ~/η~, and then clearing fractions. This compact curve may have singular points, that is, points at which the gradient of P~ vanishes. Removing the singularities of this curve gives rise to a two-dimensional connected manifold with a complex-analytic structure, that is, a Riemann surface. All compact Riemann surfaces can be obtained this way.

Since a Riemann surface Γ is a two-dimensional manifold that is orientable (owing to its analytic structure), its only topological invariant is its genus g (the number of handles in the surface). On this surface, we choose 2g cycles (that is, closed oriented curves, each with at most a finite number of singular points) aj, bj, j=1,2,,g, such that their intersection indices satisfy

21.7.3 ajak =0,
bjbk =0,
ajbk =δj,k.

For example, Figure 21.7.1 depicts a genus 2 surface.

See accompanying text
Figure 21.7.1: A basis of cycles for a genus 2 surface. Magnify

On a Riemann surface of genus g, there are g linearly independent holomorphic differentials ωj, j=1,2,,g. If a local coordinate z is chosen on the Riemann surface, then the local coordinate representation of these holomorphic differentials is given by

21.7.4 ωj=fj(z)dz,
j=1,2,,g,

where fj(z), j=1,2,,g are analytic functions. Thus the differentials ωj, j=1,2,,g have no singularities on Γ. Note that for the purposes of integrating these holomorphic differentials, all cycles on the surface are a linear combination of the cycles aj, bj, j=1,2,,g. The ωj are normalized so that

21.7.5 akωj=δj,k,
j,k=1,2,,g.

Then the matrix defined by

21.7.6 Ωjk=bkωj,
j,k=1,2,,g,

is a Riemann matrix and it is used to define the corresponding Riemann theta function. In this way, we associate a Riemann theta function with every compact Riemann surface Γ.

Riemann theta functions originating from Riemann surfaces are special in the sense that a general g-dimensional Riemann theta function depends on g(g+1)/2 complex parameters. In contrast, a g-dimensional Riemann theta function arising from a compact Riemann surface of genus g (>1) depends on at most 3g3 complex parameters (one complex parameter for the case g=1). These special Riemann theta functions satisfy many special identities, two of which appear in the following subsections. For more information, see Dubrovin (1981), Brieskorn and Knörrer (1986, §9.3), Belokolos et al. (1994, Chapter 2), and Mumford (1984, §2.2–2.3).

§21.7(ii) Fay’s Trisecant Identity

Let 𝜶, 𝜷 be such that

21.7.7 (z1θ[𝜶𝜷](𝐳|𝛀)|𝐳=𝟎,,zgθ[𝜶𝜷](𝐳|𝛀)|𝐳=𝟎)𝟎.

Define the holomorphic differential

21.7.8 ζ=j=1gωjzjθ[𝜶𝜷](𝐳|𝛀)|𝐳=𝟎.

Then the prime form on the corresponding compact Riemann surface Γ is defined by

21.7.9 E(P1,P2)=θ[𝜶𝜷](P1P2𝝎|𝛀)/(ζ(P1)ζ(P2)),

where P1 and P2 are points on Γ, 𝝎=(ω1,ω2,,ωg), and the path of integration on Γ from P1 to P2 is identical for all components. Here ζ(P) is such that ζ(P)2=ζ(P), PΓ. Either branch of the square roots may be chosen, as long as the branch is consistent across Γ. For all 𝐳g, and all P1, P2, P3, P4 on Γ, Fay’s identity is given by

21.7.10 θ(𝐳+P1P3𝝎|𝛀)θ(𝐳+P2P4𝝎|𝛀)E(P3,P2)E(P1,P4)+θ(𝐳+P2P3𝝎|𝛀)θ(𝐳+P1P4𝝎|𝛀)E(P3,P1)E(P4,P2)=θ(𝐳|𝛀)θ(𝐳+P1P3𝝎+P2P4𝝎|𝛀)E(P1,P2)E(P3,P4),

where again all integration paths are identical for all components. Generalizations of this identity are given in Fay (1973, Chapter 2). Fay derives (21.7.10) as a special case of a more general class of addition theorems for Riemann theta functions on Riemann surfaces.

§21.7(iii) Frobenius’ Identity

Let Γ be a hyperelliptic Riemann surface. These are Riemann surfaces that may be obtained from algebraic curves of the form

21.7.11 μ2=Q(λ),

where Q(λ) is a polynomial in λ of odd degree 2g+1 (5). The genus of this surface is g. The zeros λj, j=1,2,,2g+1 of Q(λ) specify the finite branch points Pj, that is, points at which μj=0, on the Riemann surface. Denote the set of all branch points by B={P1,P2,,P2g+1,P}. Consider a fixed subset U of B, such that the number of elements |U| in the set U is g+1, and PU. Next, define an isomorphism 𝜼 which maps every subset T of B with an even number of elements to a 2g-dimensional vector 𝜼(T) with elements either 0 or 12. Define the operation

21.7.12 T1T2=(T1T2)(T1T2).

Also, Tc=BT, 𝜼1(T)=(η1(T),η2(T),,ηg(T)), and 𝜼2(T)=(ηg+1(T),ηg+2(T),,η2g(T)). Then the isomorphism is determined completely by:

21.7.13 𝜼(T)=𝜼(Tc),
21.7.14 𝜼(T1T2)=𝜼(T1)+𝜼(T2),
21.7.15 4𝜼1(T)𝜼2(T)=12(|TU|g1)(mod2),
21.7.16 4(𝜼1(T1)𝜼2(T2)𝜼2(T1)𝜼1(T2))=|T1T2|(mod2).

Furthermore, let 𝜼(P)=𝟎 and 𝜼(Pj)=𝜼({Pj,P}). Then for all 𝐳jg, j=1,2,3,4, such that 𝐳1+𝐳2+𝐳3+𝐳4=0, and for all 𝜶j, 𝜷j g, such that 𝜶1+𝜶2+𝜶3+𝜶4=0 and 𝜷1+𝜷2+𝜷3+𝜷4=0, we have Frobenius’ identity:

21.7.17 PjUk=14θ[𝜶k+𝜼1(Pj)𝜷k+𝜼2(Pj)](𝐳k|𝛀)=PjUck=14θ[𝜶k+𝜼1(Pj)𝜷k+𝜼2(Pj)](𝐳k|𝛀).